Detecting Cysteine in Bioimaging with a Near-Infrared Probe Based on a Novel Fluorescence Quenching Mechanism

Near-infrared (NIR) fluorescent probes are very significant for detecting cysteine in biological systems. Herein, we report a highly selective and sensitive NIR turn-on fluorescent probe (BDP-NIR) based on BODIPY with large Stokes shift (105 nm) for detecting Cys. We clarified the sensing mechanism based on the different thiol-induced S_NAr substitution/rearrangement reaction of the probe with cysteine and homocysteine/glutathione, which leads to the corresponding amino- and thiol-BODIPY dyes with distinct photophysical properties. Moreover, a novel mechanism of fluorescence quenching was demonstrated by density functional theory calculation. The reason for the fluorescence quenching of the probe might be intersystem crossing (from singlet to triplet excited state). Moreover, BDP-NIR had a high linear dynamic range of 0–500 μM, which was promising for detecting cysteine quantificationally. Significantly, BDP-NIR was capable of sensing endogenous cysteine in living cells and in vivo.     

彩色轮胎的生产工艺及设计要点

介绍不同工艺的彩色轮胎，总结白胎侧和半彩轮胎的工艺、结构及配方设计要点。彩色轮胎改变了传统轮胎以单一黑色为主的状况，让轮胎颜色更加丰富；传统黑色轮胎的配方设计时只需考虑原材料对胶料性能的影响，彩色轮胎进行配方设计时则需同时兼顾原材料对胶料性能的影响。     

阿尔泰金莲花提取物抑制变异链球菌乳酸脱氢酶活性及抗氧化活性研究

采用微量稀释法测定了阿尔泰金莲花提取物对变异链球菌的最小抑菌浓度(MIC)和最小杀菌浓度(MBC),研究了阿尔泰金莲花提取物对变异链球菌的抑制作用,考察了阿尔泰金莲花提取物对变异链球菌产酸及乳酸脱氢酶(LDH)活性的影响,并通过测定阿尔泰金莲花提取物、牡荆素、荭草苷、抗坏血酸(VC)对DPPH自由基、ABTS自由基和·O~-_2的清除率来评价阿尔泰金莲花提取物的抗氧化活性。结果表明,阿尔泰金莲花提取物的MIC为12.5 mg·mL~(-1),MBC为25 mg·mL~(-1);阿尔泰金莲花提取物浓度越大,对变异链球菌的抑制作用就越强;当阿尔泰金莲花提取物浓度在1/8MIC～MIC范围内时,随着阿尔泰金莲花提取物浓度的增大,培养18 h后菌悬液的ΔpH值越小,LDH活性也越低,与空白对照组相比有显著性差异(P0.05);阿尔泰金莲花提取物对DPPH自由基、ABTS自由基和·O~-_2均具有一定的清除作用,且在一定浓度范围内存在量效关系。初步探讨其抑菌作用机制可能是,通过抑制LDH活性从而抑制变异链球菌产酸,影响其代谢及生长。     

张庄铁矿高阶段矿房切割天井施工工艺试验

张庄铁矿设计采矿方法为大直径深孔阶段空场嗣后充填法。为了最大化发挥采矿设备性能，降低采切工程量，提高回采效率，通过实施一系列技术攻关，实现了将采矿阶段高度由原来的60 m提高到90 m。而作为最初爆破回采的自由面及爆破补偿空间，切割天井施工工艺为影响高阶段矿房爆破回采效果的关键因素，施工质量的优劣，直接影响矿房爆破回采生产作业能否顺利进行，而二次处理在增加施工成本的同时将带来安全隐患。张庄铁矿在面临可参考的成熟经验较少的情况下，结合现场可用的作业条件采取了对比试验的方法，在安全、技术及经济多方面综合分析比较下，确定了最终方案，为张庄铁矿安全稳定生产奠定了基础，同时研究成果可为大型地下矿山生产实践提供一定的参考。     

Electron beam processed surface textures on titanium alloys for fluid-drag reduction

Ti-6Al-4V and Ti-4Al-1.5Mn alloys were employed for electron beam processing with the aim to produce surface textures efficient for fluid-drag reduction. The as-resulted surface textures were examined by using advanced optical microscopy for surface morphology analysis, optical microscopy and scanning electron microscopy for near-surface microstructure observation. The titanium model with electron beam processed surface textures was tested in wind tunnel to evaluate their fluid-drag reduction efficiency. It showed that the as-resulted non-smooth surface was characterized by parallel ridges and grooves, with height and spacing able to be customized by adjusting processing parametres. The ridges displayed continuous scales while the valley of grooves presented V-shaped ripples. Their dimensions were also related to and could be controlled by processing parametres. Further, the near-surface region was occupied by fusion zone, heat-affected zone and base metal from the outermost surface to the underlying bulk alloy. The microstructure of fusion zone was characterized by martensite phase. A heat-affected zone was sandwiched between fusion zone and the underlying base metal, with different microstructural features compared to both fusion zone and the base metal. With respect to fluid-drag reduction efficiency, titanium model with electron beam processed surface textures exhibits a reducing efficiency over 15% at attack angles of 0° and ±1°, with an air flow velocity at 24 m/s.     

原油及馏分油脱酸技术进展

石油酸是原油和馏分油中普遍存在的腐蚀性物质，其主要成分为环烷酸并且含量可以高达90%以上。环烷酸具有羧酸的所有化学性质，所以常常造成严重的腐蚀，从而影响原油加工设备及油品使用设备的正常运行和使用寿命。随着近年来世界范围内高酸原油产量的逐渐增加，高原油及各种高酸值馏分油所带来的腐蚀与产品质量问题显得愈发严重，因此迫切需要开发出经济高效的脱酸技术与工艺路线。本文较为全面而详细地总结并评述了国内外原油及油品的各种脱酸技术方法。分析表明：目前所报道的各类脱酸工艺较多，其中工业应用的加氢脱酸效果虽好但是成本较高，而其他大多数脱酸方法都存在较多的缺点或不足，因此探寻一种绿色环保、经济高效并且具有较好普适性的油品脱酸工艺显得非常迫切而必要。酯化法脱酸具有加工工艺简单、不需要复杂的后继处理，几乎可以降低所有的高酸值原油和油品（轻质、重质馏分油以及渣油）的酸值，为原料油的进一步加工提供了方便。酯化脱酸工艺的关键在于高效催化剂的选择，而目前的催化酯化体系虽然脱酸率较高，但仍存在着反应时间较长的不足，相信通过反应过程强化等手段解决该问题以后，催化酯化脱酸工艺会被很快投入到原油及油品的脱酸实际工业生产中去。     

袋装水泥装车机及拨板机构的设计与研究

针对袋装水泥装车半自动化问题，设计一款全自动装车机。首先，根据袋装水泥车间生产状况，确定水泥装车方案，即采用抽屉式逐层装车原理，利用ＳｏｌｉｄＷｏｒｋｓ创建装车机三维模型；其次，为使水泥包快速准确地到达指定位置，针对拨板机构中的分拨板及导柱进行受力分析，建立其力学模型，推导出应力公式；最后，通过 ＡＮＳＹＳ有限元软件进行分拨板的力学仿真，为后续的优化设计提供依据。     

枞树型核电轮槽精铣刀制造技术优化设计

以枞树型叶根精铣刀为例,阐述了可换硬质合金型线刀体和刀片精铣刀的优化设计、制造工艺、建模及优化设计,进行切削过程加工策略优化和加工过程模拟,设计制造了锥柄专用工装及检测环规、磨削刀片后角专用工装,采用NUMROTO软件编制刀片加工工步。该项目研制的可换刀片精铣刀型线精度完全能达到进口铣刀水平,能满足大部分轮槽与叶根加工对型线精度的要求,可以大幅度节约刀具费用。